Stephen from here in Texas sends us a few photos of his 2018 Toyota Tacoma with our winch mount installed along with our license plate bracket. He went with a Warrior Samurai 9500 short drum winch along with a Custom Splice double thick rock crawler hawse. Turned out great! US Off Road Warrior Winches and HoistsCustom Splice
As always, you can buy yours here: https://www.usoffroad.us/store/bumpers/winch-mounts/tacoma-2016/toyota-tacoma-2016-2018-winch-mount/
This is the busy time of year and we often struggle to keep up with demand. This year we started off with a larger inventory than normal to limit any shortages. So far so good overall. We have run out of FJ Camera Armor but should have another batch ready sometime around the 12th of March. We ran out of our 2012-2015 Tacoma winch mounts for a few days but 25 more just rolled off of the welding tables.
Corey from Louisiana sends us some photos of his FJ Cruiser with one of our winch mounts. Corey won this winch mount for his FJ at our Poker Run at the 2015 Jamboree with a killer hand of aces and 10s.. He added a Smittybilt 9500 winch with synthetic rope and a Factor55 Splicer from Steve Springs. He added some lights and grille from Ridgid to top it all off.
U.S. Off Road is proud and humbled to be the Event Sponsor for the 2018 Field of Flags here in Granbury, Texas. Put on by the Military Officers Association of America (MOAA) they do a fantastic job of supporting America’s Veterans. This is our small way of attempting to give back to those who have ensured our way of life. Be sure to visit the Field of Flags on 377 and if you can, donate to a great organization. If you aren’t local please visit http://granburyfieldofflags.com for more information and/or to donate.
As a side note, we are often asked about sales specials during various holidays. We hope you understand that we simply will not attempt to profit from holidays such as Memorial or Veterans Day as we prefer to celebrate them and honor those who served our great country instead.
Mark October 21st on your calendar and be sure to attend the First Annual Brazos River Off Road & Truck Show here in Granbury, Texas! This is not only a great Off Road and Truck event but a fund raiser for the Military Officer’s Association of America (MOAA) as well. Add this event to your calendar today!
Location: Hewlett Park in Granbury, Texas. Just a few blocks from the historic Granbury Square. (click the link for a map and more information)
We are a stocking distributor of what I think is a high quality winch at a great price. The Aussies designed these winches and as we all know they USE their off road gear in Australia. Each winch is tested to ensure it meets specification before leaving the factory so you know what is going on your rig and that it WILL work properly when you need it most.
Having said all of that, U.S. Off Road has been selling quite a few Mean Mother winches with nothing but great results. Not only that but we will be featuring Mean Mother at the Unlimited Off-Road Expo – TEXAS this weekend (BOOTH 32). Additionally we are partnering with Mean Mother 4WD and their distributor 3pConnect with Josh Backes at the great 2017 Lone Star Toyota Jamboree this May.
To kick this next few months off we are offering a super deal on Mean Mother 9500lb Edge Recovery Winches, whether purchased individually or in one of our Winch Mount Combination Kits by giving you one of Mean Mother’s kickass Recovery Shovels. A FREE shovel that retails for $99! You gotta check these out, they transform in to a variety of configurations and are built Aussie tough!
The long awaited and highly requested winch mount for the 2016+ Toyota Tacoma is now in stock!
Don’t want to add a full replacement bumper to your Tacoma just so you can mount a winch? You are not alone. Full replacement bumpers are 100-150+ lbs, degrade aerodynamics and are expensive. Keep your stock bumper cover, factory looks and your MPG with the installation of this winch mount within and behind the stock bumper cover.
Designed and built in Texas!
No cutting on your bumper cover!
Includes our new Big Mouth Hawse coated in a special Black or Silver Teflon infused powder!
Simple cutting of black removable chin piece for recovery points and hawse/winch opening. Skid plate acts as simple and very precise template.
Removable skid plate included. If you damage your skid plate in the future just remove 6 bolts, remove and replace!
Includes power steering cooler relocation brackets.
Optional winch solenoid box relocation bracket. (if your winch doesn’t allow side mounting)
Optional license plate mount for states that require front license plates.
CNC Laser cut – clean and precise
1″ wide shackle mounts are drilled .890″ ID for .880″ OD or smaller pins which is common for a 3/4″ shackle. Pin sizes can vary. We offer Van Beest shackles which will fit our shackle mounts.
Lighter than most aftermarket bumpers at 62 lbs WITH the included Big Mouth hawse!
Built to last. Winch tubs are .250″ steel with a .135″ skid plate.
Full height front and rear winch tub.
Will accept most winches with industry standard 10″ x 4.5″ bolt pattern.
The production prototype of our 2005-2011 Tacoma redesign rolled out today. Here’s a few quick and dirty photos for a sneak peak. Will do a last test fit sometime in the next week or so then production in late June. Should price out in the $499-525 range like our other bumpers.
Very similar to our 2012-2015 Taco bumper but about 3/4″ deeper and of course has our new 1″ wide shackle mounts.
We are absolutely elated to once again be a sponsor for the 8th Annual FJ Northeaster’s Run taking place this weekend, May 14th-17th at Rausch Creek Off Road Park in Tremont, Pennsylvania! The NE Run is a gathering of hundreds of Toyota off road enthusiasts from all over the north east and is a must do if you are in the area. If you haven’t registered then venture over to their website and do so now.
If you are going to the Lone Star Toyota Jamboree please make sure to visit us there. This is our 4th year as a sponsor for one of the finest Toyota events in the nation!
On that note, we will be gone April 29th through May 3rd. Any orders placed after April 28th at 12:00 PM will not ship until after May 4th. To ensure your order ships before then please place your order as soon as possible.
Tired of seeing about 60% field of view (FOV) out of your FJ’s backup camera? Don’t like your stock tire cover but don’t want to see the ugly camera housing exposed when you remove it?
We were too so we came up with Camera Armor. Not only does Camera Armor look better and provide a 100% FOV out of your backup camera but it also has a hidden bracket mounting system so you can mount a GoPro, antenna or light in the protective area of your spare!
As with our winch mount bumpers, we provide this to you in bare .125″ thick steel. You can paint, powder coat or whatever makes you happy. The aluminum end cap is anodized clear to protect the aluminum from the weather and keep it looking good. Hardware mounts flush and is stainless steel.
Installation is simple, pull off your spare wheel/tire, slide the camera armor over the studs and reinstall your wheel. Done. You can then leave it with the filler bracket or swap out brackets without removing the wheel again.
When you purchase Camera Armor you will receive:
Camera Armor body
Aluminum end cap/bracket mount
Filler bracket (does not protrude from under the cap but fills the slots so it doesn’t collect dirt/water)
Extended bracket with no accessory holes drilled. (you can bend, drill and cut to your heart’s desire)
2 x stainless steel flat allen head screws (1/4″ x 20)
Paint or coat as you wish, you can also paint the aluminum cap, make it yours.
U.S. Off Road will be returning for our 4th Lone Star Toyota Jamboree April 30th-May 3rd. We will be hosting our 2nd Stocker Poker Run where the winner receives a choice of FJ or Tacoma Winch Mount Bumper!
This is scheduled for Friday, May 1st at 1PM. We are going to limit this to 15 FJ’s or 2005-2015 Tacos. Looking forward to another fun Poker Run this year!