Mark from California is another happy customer and sends us some pics of his 2014 T/X Baja. Mark purchased our popular winch mount (black powder coated) for his Tacoma along with a Warn VR8S winch. He notes that the winch controller did not need to be relocated over the winch spool…which is typical with this setup.
He also goes on to say “Thank you for a quality product..” . Thank YOU for your business!
Erik from Tijuana, Mexico sends us photos of his customer’s Tacoma with our winch mount, Warn VR10S winch combination package with red Van Beest shackles. Turned out great.
This. This is how you do it! John from California sends us a photo of his Tacoma with our 2012-2015 winch mount, Warn VR10S recovery winch, Van Beest shackles, some 2″ cube lights and our 12″ hawse light mount with an Engo 12″ LED light bar. He tops it off with a Smittybilt winch rope thimble. Outstanding!
Mark from Arkansas sends us a few photos of his 2015 Tacoma with our popular winch mount, Warn VR8S recovery winch combination package along with our Sirius Pro Series LED lights. New newly redesigned VR winch works very well with our Tacoma winch mount.
“So your product is amazing and now I have my 2 Jeep buddy’s looking for similar products. Thanks again, keep up the good work and I’ll send anyone that stops me in the parking lot your way.”
Ted from Arizona sends us several photos of his 2014 Tacoma with a Smittybilt 10,000 lb X2O recovery winch. He opted to have us powder coat it black. Turned out great!
Jon in Allen, Texas sends us some photos of his beautiful 2015 Tacoma TRD Off Road rig with out winch mount, Engo winch and Sirius lights. Jon does some super picture taking as well!
“Every single time I post a shot of my truck on any social media, almost without fail, someone will ask what bumper I’m running. Always happy to point them to US Off Road”
Warren, a customer of ours from Georgia, shows off his 2015 Tacoma with one of our bullet proof winch mounts.
“I am very pleased with the U.S. Off Road Hidden Winch Bumper. Attached are some photos of my 2015 Tacoma TRD Sport with the Hidden Winch bumper installed with a ComeUp DV-9s. The bumper was painted with 2 coats of Rustoleum Self Etching Primer and four coats of Rustoleum Truck Bed Coating. Installation of the bumper and winch was pretty straightforward; no problems encountered. The Hella 700FF driving lights are mounted on a PIAA 30762 light bar modified to work with the Hidden Winch Bumper.”
Conner from Utah ordered one of our winch mounts for his 2015 TRD Offroad Tacoma a few weeks ago. We had inventory and were able to ship it out the next day so he could get his Taco ready to help support the race. He’s running a WARN M8000 winch with the solenoid pack on top center with ‘room to spare’ even after he mounted a couple of Baja Designs Squadron Pros on the light tabs we provide. He writes….
===
This weekend, we used my truck to staff the east recovery team for the Bonneville Offroad Race in Knolls, UT. We had everything from 9 cars and razor classes up to full 7100 and 8100 trucks.
About noon, we got a call from a 7100 truck was stuck in a sandy dune area of the track. They were in a blind saddle between 2 dunes with no passing zone. When we rolled up, they threw a snatch strap and shackle on one of your recovery points. As I was closing my door to start the snatch, you could hear the motor of the next truck coming up on us.
After a few stiff snatches due to weight difference, we got them out of the dune and onto the shoulder of the track safely. (The picture is right as they were able to get back under their own power.) No more than a minute later, the next truck came mobbing through the area.
Thanks to your product, we were able to recover a truck safely and make sure everyone had a great race.
===
Thank you for your business Conner! Great experience and photos.
Richard from California sends us photos of his 2014 Tacoma with one of our powder coated winch mounts along with a Smittybilt XRC 9500lb winch. Looks great!
Sheldon from Oregon bought one of our powder coated winch mounts for his 2013 Toyota Tacoma and added a Warn 9.5 XD winch and shackles. Turned out very nice!
Michael sends us photos of his 2012 Toyota Tacoma TRD Sport with our winch mount and a Smittybilt X2O 10k winch. He has also added a 3″ ARB/OME lift, TRD 4Runner Pro wheels and 285/70-17 tires.
Corey from California sends us photos of his 2015 Tacoma with our winch mount bumper using a Warn M8000 winch.
Corey goes on to say: “This is my 2015 Toyota Tacoma sbdc trd off-road. I used the warn m8000s winch. The installation went smoothly and I have used the winch a couple times to recover myself and another truck. I get a lot of compliments on how clean the winch mount looks. I decided to rattle can the mount since I anticipate scraping it from time to time anyway, touch up will be cheap and easy. This is a high quality product and I received excellent customer service when I called about the status of my order, which arrived on time. I am very pleased with your company and the product.”
These are a few photos from a customer of our new light mount with the Engo 12″ LED mounted on his Tacoma with our winch bumper. We have them for roller fairlead (shown) or hawse applications.
Todd from Colorado sends us some photos of his Tacoma with our winch bumper powder coated with our custom Teflon black along with the Van Beest Shackles and an Engo 10K winch. Very nice!
Rob from Alberta, Canada sends us a photo of his 2013 Tacoma TRD Sport. He bought our winch bumper and added a Warn M8000 with 75′ of synthetic rope, some 2″ Ridged LED lights and coated it with Duplicolor bedliner. Very nice! This one may have to go on the wall here.
“The fit and finish on the bumper was awesome and the thing fit perfectly. I am impressed by the quality of work you guys did. “
#usoffroad Warn Industries Rigid Industries LED Lighting
Timothy from Florida sends us photos of his 2015 Tacoma with our winch bumper coated in our Teflon black along with an Engo 10k winch and Van Beest Shackles coated to match the bumper. He has also installed a 3″ ToyTec lift. Very nice!
From Nathan in Texas comes photos of his 2015 Tacoma with our winch mount coated in our Teflon infused black powder coat along with an Engo 10k winch with synthetic rope and Van Beest Shackles. Nice job!
“It looks fantastic and the install was very straight forward.”
Josh from Texas sends us some photos of his 2014 TRD Tacoma with our winch bumper optioned with our Teflon infused powder coating, Warn M8000S winch and Van Beest shackles. Notice how the cable control port on the box clears any braces even though it’s vertical. Great installation photos. Very clean install!
Drew from New Mexico sends us photos of his Toyota Tacoma with our popular winch bumper, Engo 10k winch, Sirius Pro Series lighs and Factor55 Flat Link. Drew also optioned his bumper with our Teflon powder coat for a long lasting finish. Turned out very nice!
We will be out of the office Friday-Monday. Feel free to email any questions. Gone fishin'!
