Category: CUSTOMER PHOTOS

Photos of customer’s vehicles with our products.

Rob from Alberta, Canada sends us a photo of his 2013 Tacoma TRD Sport.

1 Comment

Rob from Alberta, Canada sends us a photo of his 2013 Tacoma TRD Sport. He bought our winch bumper and added a Warn M8000 with 75′ of synthetic rope, some 2″ Ridged LED lights and coated it with Duplicolor bedliner. Very nice! This one may have to go on the wall here.

“The fit and finish on the bumper was awesome and the thing fit perfectly. I am impressed by the quality of work you guys did. “

#usoffroad Warn Industries Rigid Industries LED Lighting

2005-2011 TACOMA – WINCH MOUNT – SMITTYBILT XRC9500

2 Comments

Brian from California sends us photos of his Toyota Tacoma with our 2005-2011 winch mount bumper along with some Van Beest shackles. He also added a Smittybilt XRC9500 winch and a pair of 36w, 6″ 4D spot LED pods without blocking the winch clutch lever. The bigger lights blocked off easy access to plugging in his winch control cable but he uses in cab controls so it does’t matter much to him. Nice job!

#usoffroad smittybilt Van Beest USA

Josh from Texas sends us some photos of his 2014 TRD Tacoma with our winch bumper optioned with our Teflon infused…

2 Comments

Josh from Texas sends us some photos of his 2014 TRD Tacoma with our winch bumper optioned with our Teflon infused powder coating, Warn M8000S winch and Van Beest shackles. Notice how the cable control port on the box clears any braces even though it’s vertical. Great installation photos. Very clean install!

#usoffroad Warn Industries Van Beest USA

Today we have some photos from another customer, Pam from Florida, of her 2011 Cavalry Blue FJ Cruiser with our…

1 Comment

Today we have some photos from another customer, Pam from Florida, of her 2011 Cavalry Blue FJ Cruiser with our winch bumper (purchased through our dealer Pure FJ Cruiser). She coated it in silver to match the factory plastic and added a Smittybilt 8000lb winch and called it a day. Looks great!

Pam says “I love the look and functionality.”

#usoffroad Ray Shelton smittybilt

Mike from California sends us photos of his Army Green FJ Cruiser sporting our winch bumper along with an Engo 10k…

2 Comments

Mike from California sends us photos of his Army Green FJ Cruiser sporting our winch bumper along with an Engo 10k winch, Van Beest shackles with our Teflon OD Green coating and Sirius Pro Series lights. He also selected our Teflon infused powder coating in black for his bumper as well. We love the bedliner finish on the bumper cover, light grille and other components along with our favorite color of green! Very nice.

#usoffroad MotoAlliance Van Beest USA

William from Colorado sends us a photos of his 2013 Tacoma that our dealer, High Country Performance 4×4 in…

1 Comment

William from Colorado sends us a photos of his 2013 Tacoma that our dealer, High Country Performance 4×4 in Englewood, installed for him last year. They installed a Warn 8000S, Rigid D series lights and a Factor55 Flat Link. Very nice!

(this is one of our older versions with the 1/2″ shackle mounts)

#usoffroad High Country Performance 4×4 Warn Industries Rigid Industries LED Lighting

Today we have some interesting photos from Joe in Switzerland.

Leave a comment

Today we have some interesting photos from Joe in Switzerland. He bought our FJ bumper along with an Engo 12000lb winch but had to deal with some interesting requirements to install it in Switzerland. I’ll quote Joe below:

“HERE SOME PICTURES OF MY TOYOTA FJ CRUISER 2007 FOR FREE USE.

IN SWITZERLAND IT IS ALMOST IMPOSSIBLE TO INSTALL A WINCH. THERE ARE SOME CONDITIONS:

THE CAR MUST BE PRODUCED BEFORE 2010

ALL PARTS WHO COULD BLESS PEDESTRIANS, MUST BE PROTECTED (SHACKLE MOUNTS!)

WINCH-OPENINGS HAVE TO BE SMALLER THAN 80 MM

THE OPENING ITSELF HAS TO BE CLOSED BY A GRID

SO, THAT WAS A REAL CRUX!! I SPENT HOURS BY SEARCHING A PROTECTION FOR THE SHACKLE MOUNTS…

BY ACCIDENT I FOUND AN ADVERTISEMENT OF A SMALL 3-D-PRINTING COMPANY, CALLED “EXAPARTS”, ONLY 5 KM AWAY. I ONLY HAD TO DESIGN THE PROTECTOR IN 3D AND TO DAYS LATER I COULD INSTALL THE PROTECTORS MADE OF

STRONG PLASTIC MATERIAL.

BY THE WAY: THEY CAN PRINT ALMOST ANY RARE SPECIAL PART FOR CAR INTERIOR / EXTERIOR OR RESTORATION.

THE TOTAL DISMANTLING AND MANTLING OF YOUR BUMPER AND THE ENGO 10’000 WINCH TOOK 3 ½ HOURS.

MOST OF THE TIME I SPENT BY UNSCREW THE TOYOTA FRONT STEEL PROFILE… AN INCREDIBLE BODY-BUILDING EXECISE!

THE FITTING ACCURACY AND THE WORKMANSHIP OF YOUR FRONT BUMPER IS AMAZING!

THE SHACKLES MADE OF STAINLESS STEEL I FOUND IN AN ENGLISH YACHT OUTFITTER.”

So, a very neat way of dealing with his country’s laws and requirements. Very nice job!

2008 Tacoma – Winch Mount – Engo Winch

1 Comment

Cole from Colorado sends us some photos of his 2008 Tacoma with our 05-11 winch mount bumper with our Teflon infused powder coat option, Engo 10k winch with synthetic rope and wireless controller and Van Beest shackles. Notice the factory skid plate and how he kept the factory grille work above the bumper. Very incognito! The Method wheels really top things off!

Buy yours here: https://www.usoffroad.us/store/bumpers/winch-mounts/tacoma-2005-2011/tacoma-05-11-winch-mount-bumper/

 

 

2015 Tacoma Winch Mount – Smittybilt 9500 – Supercharged

1 Comment

 

Erik from Wyoming sends us photos of his Supercharged 2015 Tacoma featuring our winch bumper in our special Teflon infused silver powder coat and a Smittybilt 9500lb winch with steel cable. Erik has also added a 3″ ToyTec Boss lift with American racing wheels wrapped in BFG KO2 tires.

 

To top it off he has a Magnuson Supercharger making 325hp/375 ft lbs all exiting Flowmaster duals.

 

Very nice Taco!

 

2013 Tacoma Winch Mount – Warn M8000S – Supercharger

1 Comment

 

Daren from Washington state sends us some interesting photos of his 2013 Tacoma with our winch bumper installed. He used a Warn M8000S with a Factor55 ProLink but also installed an N-Fab light bar ‘which is attached to the bumper with some DIY brackets.’.

 

What is notable beyond the custom light bar installation is the fact that his Taco is supercharged.

 

“Brad, not sure if you remember, but before I ordered my bumper I e-mailed you about whether I would have to move my intercooler pump. Well the answer is yes, I had to move it up about 4”. Pretty easy to do, but if anybody else asks you can tell them it does have to move. I included a picture with the pump in it’s original location and one after I moved it.”

 

“Really happy with the looks and the quality of the bumper, thanks.”

 

Nice work and good information to have for other supercharged Taco owners!

 

#usoffroad Warn Industries N- FAB