FJ Cruiser Backup Camera Armor

$79.00
FJCA
In stock
+ −

 
Be sure to read the fitment notes regarding TRD and aftermarket wheels below AND make sure to read the install and use docs under the Documentation tab above.

Tired of seeing about 60% field of view (FOV) out of your FJ's backup camera? Don't like your stock tire cover but don't want to see the ugly camera housing exposed when you remove it?

We were too, so several years ago we came up with Camera Armor. Not only does Camera Armor look better and provide a 100% FOV out of your backup camera but it also has a hidden bracket mounting system so you can mount a GoPro, antenna or light in the protective area of your spare!

As with our winch mount bumpers, we provide this to you in bare .125" thick steel. You can paint, powder coat or whatever makes you happy. Hardware mounts flush and is stainless steel.

As an option you can select powder coating and your color above or leave as is to receive as bare steel. The black and silver are the same formulas as offered on our bumpers and shackles.

When you select the "Powder Coat" option this color will apply to the main body, cap and filler bracket. The 'T' bracket will be uncoated as you may/will need to drill, bend or weld it. The screws will remain stainless.

The aluminum cap is bare aluminum by default unless you have it powder coated.

Otherwise, paint or coat as you wish, you can also paint or polish the aluminum cap, make it yours.

Installation and use is simple, pull off your spare wheel/tire, slide the camera armor over the studs and reinstall your wheel. Done. You can then leave it with the filler bracket or swap out brackets without removing the wheel again.

If your FJ did not come with a backup camera you would need to obtain the camera mount from Toyota. Some customer have made their own mounts that work inside of our camera armor.

When you purchase Camera Armor you will receive:

  • Camera Armor body
  • Aluminum end cap/bracket mount
  • Filler bracket (does not protrude from under the cap but fills the slots so it doesn't collect dirt/water)
  • Extended bracket with no accessory holes drilled. (you can bend, drill and cut to your heart's desire)
  • 2 x stainless steel flat allen head screws (1/4" x 28)
  • See the Documentation tab for install and use docs.

BE SURE TO READ THIS BEFORE ORDERING!

The camera armor body is 4" in diameter and will fit all 106mm (4.17") hub ID (inside diameter) aluminum and steel wheels except for some TT/TRD/TTUE and aftermarket wheels. If you have aftermarket wheels be sure to check your wheel hub ID before ordering. Seems there is a ridge in the hub of some wheels that give the center cap something to snap in to. This ridge prohibits fitment of the cam armor.

NOTE: 2 customers have informed us that it works fine with the 16" and 17" TRD Pro wheel as pictured below.


(customer painted with TRD logo)

Wheels that we KNOW do not work. This does not mean there are not other wheels out there that will not work. All regular (non TRD except as noted above) wheels work with our Cam Armor.

Installation & Use (cam_armor_install-use.pdf, 120 Kb) [Download]

Manufacturer:
U.S. Off Road
Toyota FJ Winch Mount Bumper
FJ-07
Toyota FJ Cruiser Winch Mount Bumper
$525.00

Toyota FJ Cruiser Winch Mount Bumper - 2007-2014
Over a thousand sold all over the world! Made in America - Abused World Wide!

Don't want to add a full replacement bumper to your FJ just so you can mount a winch? You are not alone. Full replacement bumpers are 100-150+ lbs, degrade aerodynamics and are expensive. Keep your stock bumper cover, classic FJ looks and your MPG with the installation of this winch mount within and behind the stock bumper cover.
  • Designed and built in Texas!
  • CNC Laser cut - clean and precise
  • 1" wide shackle mounts are drilled .890" ID for .875" OD or smaller pins which is common for a 3/4" shackle. Pin sizes can vary. We offer Van Beest shackles which will fit our shackle mounts.
  • Mounting ear reinforcement plates for maximum clamping force.
  • A/C line notch to help safely clear A/C lines
  • Lighter than most aftermarket bumpers at 55.5 lbs.(51 lbs with no shackle mounts)
  • Built to last. Winch tubs are .250" steel with a .125" facia for a total of .375" of protection up front!
  • Full height front and rear winch tub.
  • Reinforced lower facia with 3 gussets, adds bashplate protection up front.
  • Will accept most winches with industry standard 10" x 4.5" bolt pattern.
  • Works with either roller fairleads or synthetic style hawse.
  • Light tabs to accomodate most cube style (3") lights such as our Sirius Pro Series LED's.
  • Will permit the use of the OEM Toyota brush gaurd.

We offer powder coating in black and silver in a very durable textured powder coat and can do custom colors for an additional fee. Please keep in mind that even though we go to great lengths to protect the coating we are not responsible for shipping damage to any coatings. Expect a 5-7 business day delay in shipping if you want your bumper coated. Read this article for more information.

PLEASE READ THE FAQ AT THE TAB ABOVE AND THE ARTICLES BELOW. INSTALL DOCS ARE LOCATED IN THE DOCUMENTATION TAB ABOVE.

IMPORTANT INFORMATION

Installation Videos
Winch Fitment
Paint/Coatings
Suspension Article 
Customer Install Photos

WEIGHT EXAMPLE

Winch mount bumper: 55.50 lbs
Winch with no rope: 52 lbs
85' x 3/8" AmSteel rope: 3.6 lbs
Aluminum hawse: 1.5 lbs
Coating and fasteners: 1 lb
Total weight: 113 lbs
 
In stock
Free shipping
Save 6%
USORVIVB
FJ Bumper - Viper Elite Winch - Shackle Combo
$950.00 $890.00

FJ Winch Mount Bumper - Viper 12K Elite Recovery Winch - Van Beest Shackle Combination for all Toyota FJ Cruisers.

Everything you need to install a winch, one of our bumpers and two shackles on your FJ all at a discounted price.

FREE shipping via FedEx Ground to the lower 48 states on all winch bumper combo packages! Please read this if you reside outside of the USA.

What is included? (Visit the Related Products tab for links to specific product information and install docs)

1. Our popular FJ Cruiser Winch Mount bumper.

2. Viper Max 12,000 lb Elite Recovery Winch with black synthetic rope.

3. Van Beest 3/4" shackles x 2. (They come silver with green pins but you can choose to have them powder coated to match your bumper above)

If you want to add lights look at the Related Products tab and purchase a couple of the Sirius 2" lights.

We offer powder coating in black and silver in a very durable textured powder coat and can do custom colors for an additional fee. Please keep in mind that even though we go to great lengths to protect the coating we are not responsible for shipping damage to any coatings. Expect a 5-7 business day delay in shipping if you want your bumper coated. Read this article for more information.

Note: Main photo above is shown with Sirius lights that are optional. Factor55 thimble not available.

PLEASE READ THE FAQ AT THE TAB ABOVE AND THE ARTICLES BELOW. INSTALL DOCS ARE LOCATED IN THE DOCUMENTATION TAB ABOVE.

IMPORTANT INFORMATION

WEIGHT EXAMPLE

Winch mount bumper: 55.50 lbs
Winch with no rope: 52 lbs
85' x 3/8" AmSteel rope: 3.6 lbs
Aluminum hawse: 1.5 lbs
Coating and fasteners: 1 lb
Total weight: 113 lbs

 

In stock

New Stuff!

Garage Sale!