Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
Toyota FJ Cruiser Winch Mount
U.S. Off Road

Toyota FJ Cruiser Winch Mount

$550.00 In Stock Sold out
CODE: FJ-07
Categories: Winch Mounts
Winch Mount Coating
  • Description
  • FAQ
  • Reviews

You want to add a winch to your FJ Cruiser but not a heavy full replacement bumper? You are not alone. Full replacement bumpers are 100-150+ lbs, force suspension upgrades and are expensive. Keep your stock bumper cover, classic FJ looks and your MPG with the installation of this winch mount within and behind the stock bumper cover.

Be sure to add lights, winch and shackles to your order!

Please keep in mind that if you select a winch and need everything shipped outside of the lower 48 states there could be additional shipping charges. Contact us to verify shipping charges if that is the case.

  • Designed and made in Texas!

  • CNC Laser cut – clean and precise

  • 1″ wide shackle mounts are drilled .900″ ID for .875″ OD or smaller pins which is common for a 3/4″ shackle. Pin sizes can vary, especially Chinese made shackles. We offer quality Van Beest shackles which will fit our shackle mounts.

  • Mounting ear reinforcement plates for maximum clamping force.

  • A/C line notch to help safely clear A/C lines

  • Lighter than most aftermarket bumpers at 55.5 lbs.

  • Built to last. Winch tubs are .250″ steel with a .125″ fascia for a total of .375″ of A36 steel protection up front!

  • Full height front and rear winch tub.

  • Reinforced lower fascia with 3 gussets, adds bashplate protection.

  • Will accept most winches with industry standard 10″ x 4.5″ bolt pattern.

  • Works with either roller fairleads or synthetic style hawse.

  • Light tabs to accommodate most cube style (3″) lights such as our Sirius Pro Series LED’s.

  • Will permit the use of the OEM brush guard.

We offer powder coating in black and silver in a very durable textured powder coat and can do custom colors for an additional fee. If you order powder coat then we media blast and shoot one coat of zinc primer then two or more coats of powder. Please keep in mind that even though we go to great lengths to protect the coating we are not responsible for shipping damage to any coatings. Expect a 5-10 business day delay in shipping if you want your bumper coated. 

PLEASE READ THE FAQ AT THE TAB ABOVE AND THE ARTICLES BELOW. INSTALL DOCS ARE LOCATED AT THE LINK BELOW.

IMPORTANT INFORMATION
Installation Videos
Installation Docs
Winch Fitment
Winch Selection
Paint/Coatings
Suspension Article
Customer Install Photos

WEIGHT EXAMPLE
Winch mount bumper: 55.50 lbs
Winch with no rope: 52 lbs
85′ x 3/8″ AmSteel rope: 3.6 lbs
Aluminum hawse: 1.5 lbs
Coating and fasteners: 1 lb
Total weight: 113 lbs

FJ Cruiser Winch Mount Reviews

 


Frequently Asked Questions:

Does the winch mount come with a winch, fairlead or shackles?
No it does not. Bare steel winch mount only. It does include the 2 12mm bolts and washers you will need though.
Optional shackles and lights can be added to your order. Fairleads and hawse typically come with a winch.

Do you ship outside of the United States? If so, how much is shipping?
Yes, we ship Internationally. Just add what you want to the Cart and obtain a shipping quote there.

How much does it cost to ship domestically?
We ship our Winch Mounts via FedEx Ground here in the 48 states.
Add the product to your cart then go to your cart, there you will be given an opportunity to receive a shipping quote based on your address.

Which winches fit this mount?
Just about any winch will work. Read the technical article in our blog for a more in depth answer.
The mount uses a standard 10" x 4.5" bolt pattern so any winch will fit and there is plenty of room in the mount itself.
The rare issue is the bracing with the hood release behind the FJ grille and above the winch and the A/C line on 2010 and up models.
Read the installation docs for more information.

What winch rating do you suggest for this application?
That is a big question. Unless you drive an FJ40 or a CJ/TJ you better go with 9000 lbs or larger.
Read the Winch Selection article for more insight.

Does the front end need to be lifted after installing this mount and a winch?
Short answer is maybe. Read our Suspension article in the Tech section of our website for more information.
Typically you will see a 3/8" to 1/2" drop by adding the mount (57lbs) and a winch (75-90lbs).
This is still a much lighter alternative to a full bumper replacement (75-150lbs without a winch!).
In our testing we noticed no difference in how the FJ drove after installation on a stock vehicle.
Having said that, because the FJ comes from the factory with some rake (front lower than rear) it wouldn't hurt to lift it a bit to level things out. Read this article about using the Bilstein adjustable shocks to achieve a more level stance and much better ride vs stock for a reasonable price.

How hard is it to install?
Not really hard at all. It takes more time to prep and paint/coat the mount than it does to install (we suggest our optional powder coat).
Figure 3 - 6 hours depending on the equipment you are installing (just the winch mount, winch, lights, etc?) your abilities and how big of a hurry you are in.
You can read the install docs and watch our customer supplied install videos for more info.

Will this work with suspension and body lifts?
Our bumpers work fine with any suspension lifts but will NOT work with body lifts as our bumper needs to line up with the bodywork but attaches to the frame.
A body lift moves the bodywork in relationship to the frame.

Customer Reviews

Based on 12 reviews
100%
(12)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Mike Bowser
Bandland Apex winch install

US Off Road Fj winch mount is top notch quality, made the install of a much needed winch easy and looks great, the fit and finish was perfect.
Thanks for a great product.

R
RBZ-Yota
Great mount!

I’m very satisfied with my new winch mount! It’s very beefy and it was super easy to install. I didn’t need to make any adjustments at all. It fit great!

W
William Davis
Fits perfectly and works great!

Thanks so much for the engineering behind this winch mount, it fit my FJ perfectly and was a fairly easy install. It looks great too!

S
Sheharyar Khan
Amazing product

Excellent service, excellent product

B
Blaine

5 stars!!! No flaws on the welds and it’s straight. If you’re thinking about getting one pull the trigger. Absolutely a great product. Waiting on my winch I ordered to install and I will definitely send pictures to the website. Thanks US off road.

Recently Viewed