No items found matching the search criteria
Having a fully stocked and properly maintained recovery kit is an essential accessory for any 4WD enthusiast. It is very important to have quick and easy accessibility to all your recovery equipment. Each Mean Mother recovery kit has been carefully tailored to include the correct equipment for most recovery situations.
The Mean Mother 8 piece kit is best suited to the 4WD enthusiast who has a winch installed on the vehicle or a hand winch on board. Designed to maximise winch capabilities, performance and versatility. The kit offers users the ability to self recover or perform a snatching recovery.
Also known as a recovery blanket, they are one of the most important safety accessories you can own. Designed to eliminate the whipping action of a strap or winch cable in the event of a failure, they reduce the possibility of personal injury and vehicle damage. The damper comes in a high visibility safety orange with reflective tape for both day & night use. To install, simply fold the damper over the strap or cable and position midway between the vehicle and recovery strap.
Quality orange vinyl winch cable damper with reflective silver stripes, hook and loop tape and a storage pocket on the inside.
Mean Mother built the EDGE series recovery winch to appeal to the 4WD enthusiast who is passionate about quality but wants value for money. The EDGE series ticks all those boxes with standard features not found on comparable winches.
Each winch in the EDGE series features a three stage planetary gearbox with sintered steel bushings which have been pressed and stamped (no pop rivets) into the gear carrier. A sliding ring gear clutch provides maximum strength and efficiency in forward and reverse winching operations with ease of free spool functionality. Each gear box is assembled and lubricated using synthetic grease and conforms to our strict assembly guidelines. Providing strength and enduring the pulling forces exerted is a hardened seamless steel drum assembly. Delivering maximum safety during a recovery is an automatic load holding in-drum brake system.
Delivering power to the winch is a waterproof solenoid that uses Ag-Cd alloy contacts (Silver cadmium alloy). The technology and quality of these contactors resist arching when switching currents. This prevents the contactors from fusing together creating a closed circuit which can potentially damage your winch or vehicle and possibly serious injury to the operator.
This solenoid is housed in a sleek and stylish control box which has a waterproof plug. The heavy duty hand control comes with a 5 metre power cord with the option to upgrade to a wireless remote control which offers the user complete control and flexibility to stand well clear of the winch during operation.
The 9500lb & 12000llb series winches use an efficient 12 volt 4.8hp series wound motor. These models offer performance and reliability in the toughest of conditions. We are so confident in the quality and design of our EDGE series winches we offer a limited 5 year mechanical component warranty and a 1 year electrical component warranty.
EDGE SERIES FEATURES
Three Stage Planetary with quality components
-Sintered Steel Bushings -Hardened Steel Gears
Waterproof contactor (solenoid) system. Compact design, can be permanently mounted on the bull bar or in the engine bay.
Waterproof quality plug with protective cap.
All EDGE series winches have been equipped with Tinned Coated Copper Power Cables with PVC insulation and the additional protection of a fibreglass outer sheath.
Each synthetic rope is fitted with a stainless steel thimble with crush tubing for maximum eyelet strength.
Dyneema® is a safer and lighter option than wire cable, and is regarded as the ultimate in performance.
WHAT'S IN THE BOX
PERFORMANCE TESTED & GUARANTEED
To ensure the very best manufacturing processes are undertaken in the building of our EDGE series winches we have developed our own detailed testing procedures to ensure they meet and exceed our engineering, performance and quality benchmarks. Our testing procedures are divided into two individual areas:
Each model is tested to the following specifications and recorded:
The winch is tested to the maximum duty cycle (1 minute) and rated line pull (winch applicable rating) in a dynamic test. This test is performed no less than 100 times and recorded; furthermore the first (1st) cycle is tested to 1.25 times the rated line pull. After the winch has passed 100 cycles without failure the winch and components are passed and inspected.
NOTE: All testing was performed with the 1st layer of winch cable on the drum.
These tests are designed to examine the overall strength and ability of the winch while observing and recording the important characteristics and operational performance specifications.
Please refer to our warranty statement for further details.
Winch Bumper - Mean Mother 9500lb Winch - Van Beest Shackle Combination for all Toyota FJ Cruisers.
Everything you need to install a winch, one of our bumpers and two shackles on your FJ all at a discounted price.
Shipping is included in the price via FedEx Ground to the lower 48 states! Please read this if you reside outside of the USA.
What is included? (Visit the Related Products tab for links to specific product information and install docs)
1. Our popular FJ winch mount bumper.
2. Mean Mother Edge 9500lb winch with synthetic rope and a remote control.
3. Van Beest 3/4" shackles x 2. (They come silver with green pins but you can choose to have them powder coated to match your bumper above)
We offer powder coating in black and silver in a very durable textured powder coat and can do custom colors for an additional fee. Please keep in mind that even though we go to great lengths to protect the coating we are not responsible for shipping damage to any coatings. Expect a 5-7 business day delay in shipping if you want your bumper coated. Read this article for more information.
PLEASE READ THE FAQ AT THE TAB ABOVE AND THE ARTICLES BELOW. INSTALL DOCS ARE LOCATED IN THE DOCUMENTATION TAB ABOVE.
Winch mount bumper: 55.50 lbs Winch with no rope: 52 lbs 85' x 3/8" AmSteel rope: 3.6 lbs Aluminum hawse: 1.5 lbs Coating and fasteners: 1 lb Total weight: 113 lbs
MADE IN AMERICA ~ ~ ~ ABUSED WORLDWIDE
Suitable for Edge and Peak series winches only. Connects to the existing control box or contactor plug to allow wireless winch control.
Our Tacoma Winch Mount Bumper - Mean Mother 9500lb or 12000lb Winch - Van Beest Shackle Combination for all Toyota Tacoma Models 2005-2011.
Everything you need to install a winch, one of our bumpers and two shackles on your Tacoma all at a discounted price.
Shipping is included in the price via FedEx Ground to the lower 48 states! Please read this if you reside outside of the USA.
What is included? (Visit the Related Products tab for links for specific product information and documentation)
1. Our popular Tacoma winch mount bumper.
2. Mean Mother Edge 9500lb or 12000lb winch with synthetic rope and a remote control.
Winch Mount Bumper - Mean Mother Recovery Winch - Van Beest Shackle Combination for all Toyota Tacoma Models 2012-2015.
What is included? (Visit the Related Products tab for links for specific product information and install docs)
(main photo above shows lights but this package does not come with lights, they can be purchased separately or in our light package combo, see related products tab above)
Be sure to read the 4wd Toyota Owner article (14mb pdf) about our FJ winch mount and Mean Mother 9500S winch combo!
Polished alloy fairlead with Mean Mother logo for use with synthetic ropes. Suits 9500 and 12000lb 4WD recovery winches.
Polished alloy fairlead with Mean Mother logo and 1" (25mm) offset bolt holes for use with synthetic ropes. Suits 9500 and 12000lb 4WD recovery winches.
Commonly needed for ARB bumpers.
For use with synthetic rope, 10" (254mm) mounting bolt pattern and Mean Mother log, fits most bumpers. Suits Mean Mother 9500 and 12000lb 4WD recovery winches.
Our Toyota FJ Cruiser Winch Bumper - Mean Mother Edge 9500 or 12000 lb Recovery Winch - Sirius lights - Van Beest Shackle Combination Package!
Everything you need to install a winch, one of our bumpers, two shackles and lights on your 2007-2016 FJ Cruiser all at a discounted price.
What is included? (Visit the Related Products tab for specific information about each item)
4. Sirius 2" LED Driving Lights (select your switch and lense type options above).
Winch Mount Bumper - Mean Mother Winch - Sirius Pro Series Lights - Van Beest Shackle Combination for all Toyota Tacoma Models 2012-2015.
$50 Flat Rate shipping via FedEx Ground to the lower 48 states! Please read this if you reside outside of the USA.
3. Sirius Pro Series Lights x 2 (select your switch and lense type options above)
Winch Mount Bumper - Mean Mother Winch - Sirius Pro Series Light - Van Beest Shackle Combination for all Toyota Tacoma Models 2005-2011.
Everything you need to install a winch, one of our bumpers, 2 lights and two shackles on your Tacoma all at a discounted price.
2. Mean Mother 9500 or 12,000 lb winch with synthetic rope and a remote control. (select winch above)
3. Sirius Pro Series lights. (select your options above)
4. Van Beest 3/4" shackles x 2. (They come silver with green pins but you can choose to have them powder coated to match your bumper above)
Winch Mount Bumper - Mean Mother Winch - Van Beest Shackle Combination for all Toyota Tacoma Models 2016+.
THIS is the hot ticket for your 2016+ Tacoma. The Mean Mother winch makes this install easy as it comes with the correct bracket to mount your control box on the motor side of the winch. Mean Mother, in our humble opinion, is the best bang for your buck if you want a high quality winch at a great price!
What is included? (Visit the Related Products tab or links below for specific product information and documentation)
1. Our Tacoma winch mount.
2. Mean Mother Edge 9500 lb or 12,000 lb recovery winch with synthetic rope and wireless remote.
This uniquely designed 4x4 recovery shovel offers you everything from a small spade to full sized long handle shovel to easily shift sand and dirt at a rapid rate. Its versatility is unmatched with up to five different configurations to suit most recovery situations. With a PE outer skin and reinforced steel core, it’s strong enough to handle the toughest of conditions and comes packed neatly in its own custom storage bag.
Air jacks are the perfect recovery item for any off road traveller exploring areas where soft sand, snow & mud might be encountered. When a vehicle gets bogged in these conditions a normal jack is useless as it will sink into the ground. The Mean Mother air jack can raise a vehicle high enough so you are able to position rocks, wood or other objects to assist in creating traction for the wheels. It works by using the vehicle’s exhaust gases from the tailpipe to inflate the air bag. Alternatively it can be inflated using an onboard or portable air compressor.
The air jack bag features a toughened double layer reinforced lifting surface which provides stability and control when raising a vehicle. Constructed from heavy duty high tenacity nylon, it’s coated with plasticised PVC to provide maximum strength and resistance against tearing. Special triangular feet built into the base provides superior grip and maximum grounding in all conditions. Exhaust jacks are not an alternative to the vehicle’s factory supplied jack, they are a serious recovery product.
Award winning Mean Mother Adventurer 3 Air Compressor
MAX AIR FLOW: 160 Litres per minute (42 Gallons per minute / 9,800 cubic inches per minute)
VOLTAGE: 12 Volt DC
CYLINDER: 60mm (2.4”)
MAX CURRENT: 45amp
MAX PRESSURE: 150 PSI (1,034 kPa)
THERMAL CUT OUT PROTECTION: Active at 105°C (220°F)
DUTY CYCLE: 45 Minutes at 40 PSI (276 kPa)
MOTOR: 0.73hp (0.54Kw)
COOLING: Cooling fins
POWER CABLES: 2.4m (7.8’) with durable battery clamps
CONTROL: Premium wireless remote system & On/off toggle switch
WIRELESS REMOTE: 2.4GHz <5.5dBm (3.6mW) - Powered by 1 x 12V 23A L1028 battery (included)
ELECTRIC CURRENT PROTECTION: Circuit breaker with reset button
ADAPTER HOSE: 0.5m (1.65’) Rubber hose with quick connectors, gauge & air bleed-off button
EXTENSION HOSE: 5m (16.5") rubber hose with quick connectors
VALVE CONNECTORS: 1 x screw type and 1 x thumb lock quick connector
GAUGE: 0-150 PSI (0-10 BAR / 0-1,034 kPa)
OVERAL DIMENSIONS: 32.5cm x 15cm x 26.5cm (12.8” x 5.9” x 10.4”)
WEIGHT: 8.7kg (19.2lb)
BASE: Metal sand tray with rubber feet. Can be permanently mounted to a vehicle
STORAGE: Heavy duty bag with zipper
ACCESSORIES: Inflation adaptors for camping & equipment
Mean Mother Tire Repair Kit - Heavy Duty
The Mean Mother tIre repair kit has all the necessary components to complete an emergency repair to a tubeless tIre. The kit features a set of long nose pliers which are handy for removing objects imbedded in the tread.
This durable camping light kit features four ultra-bright waterproof LED light bars with magnetic end caps to allow for easy positioning when you need it.
We use these in our USOR expo tent and love them!
The Dual Battery Monitor is designed to monitor battery voltages and amp flow of individual batteries within a dual battery system. The easy to read backlit LCD screen displays charging or discharging status and voltage levels for both the starter and axillary batteries.
The Dual Battery Monitor also features a warning tone for high and low voltage, as well as a link button for manual override when paired with a Mean Mother Dual Battery Isolator (sold separately).
Amp shunt included
Designed for those with dual battery systems in place, the Dual Battery Isolator allows the alternator to charge two batteries at the same time, switching to the auxillary battery once the starter battery is fully charged.
Pre-set to prioritize the main battery, the voltage sensitive automatic isolator also features pre-set engage and disengage voltages, electronic ignition protection, a manual override link button, and a calcium mode for vehicles fitted with calcium batteries.
12V - 140A
The Mean Mother rear wheel bag is made from heavy duty material with adjustable, removable straps, and features reflective strips for increased visibility. The protection of the zipper over-flaps help to protect against dust, sand, and rain.
The design of the removable straps and carry handle allow for easy emptying and cleaning while leaving the straps attached to your spare tire. The anti-theft tag allows use of a padlock to secure the bag to the rim of your spare wheel.
This bag can be mounted to the tailgate of SUV's with the additional Mean Mother storage bag mounting strap (# MMSBH02).
2020 Recovery Off Road, LLC.