2016+ Tacoma 30" Light Kit - Lower Grille

List price: $279.95
$269.95
You save: $10.00 (4%)
Free shipping
Save 4%
70621
In stock
+

Give your Tacoma the power of off-road illumination with Rough Country's 30-inch LED Hidden Bumper LED Kit. This all-inclusive lighting kit fits perfectly into the factory opening on 2016+ Toyota Tacoma bumpers, housing a 30-inch LED Light bar for impressive lighting power.

This kit includes Rough Country’s popular 30” Single-Row CREE LED Light Bar, featuring a powerful 12,000 Lumen, 150-Watt output. The durable die-cast aluminum housing offers incredible protection while the IP67 Waterproof design wards off mud, water, and dust. The included mounts provide a clean, flush look that blends in so well you’ll never see a Tacoma bumper the same way! It’s the perfect position for extra lighting that you’ll find handy time and time again. Includes Rough Country's 3-Year LED Warranty and a Lifetime Warranty on the mounting system.

FEATURES:

12000 lumens
150 watts
Contains 30, 5 watt high intensity LEDs
30 degree spot beam
IP67 Waterproof rating
Durable die cast aluminum housing
Includes wiring harness
Length: 31.37-inches | Depth: 3.12-inches | Height: 1.6-inches
Factory appearance
Brackets mount hidden away from view
Light features 3 year warranty
Mounting brackets feature Lifetime warranty

SPECS:
Install Time: 3-4 hours 
View Instructions

NOTES:
Requires cutting and trimming factory bumper grille

Manufacturer:
Rough Country
TACO16MM
$1,510.00 $1,440.00

Winch Mount Bumper - Mean Mother Winch - Van Beest Shackle Combination for all Toyota Tacoma Models 2016+.

THIS is the hot ticket for your 2016+ Tacoma. The Mean Mother winch makes this install easy as it comes with the correct bracket to mount your control box on the motor side of the winch. Mean Mother, in our humble opinion, is the best bang for your buck if you want a high quality winch at a great price!

Everything you need to install a winch, one of our bumpers and two shackles on your Tacoma all at a discounted price.

Shipping is included in the price via FedEx Ground to the lower 48 states! Please read this if you reside outside of the USA.

What is included? (Visit the Related Products tab or links below for specific product information and documentation)

1. Our Tacoma winch mount.

2. Mean Mother Edge 9500 lb or 12,000 lb recovery winch with synthetic rope and wireless remote.

3. Van Beest 3/4" shackles x 2. (They come silver with green pins but you can choose to have them powder coated to match your bumper above)

ADDITIONAL OPTIONS:

  • Select Bare Steel or black or silver powder coating for your winch mount.
  • We send this winch mount with our new Big Mouth hawse, By default it is coated with a special Teflon infused black powder but you can choose silver as well.
  • Winch solenoid/contactor control box remote mount bracket. This will enable you to mount most any box to the side of the winch and within our winch tub. These come bare steel but can be powder coated black as an option. You really do NOT need this as the Mean Mother winches come with various mounting brackets and can mount the box on the motor (passenger) side of the winch.
  • License plate mounting bracket for states that require a front license plate. Can option in silver or black powder coat as well.

 

We offer powder coating in black and silver in a very durable textured powder coat and can do custom colors for an additional fee. Please keep in mind that even though we go to great lengths to protect the coating we are not responsible for shipping damage to any coatings. Expect a 5-7 business day delay in shipping if you want your bumper coated. Read this article for more information.

 

PLEASE READ THE FAQ AT THE TAB ABOVE AND THE ARTICLES BELOW. INSTALL DOCS ARE LOCATED IN THE DOCUMENTATION TAB ABOVE.

In stock

TACO-16
$525.00 $499.00

Toyota Tacoma Winch Mount Bumper - 2016-2018

Don't want to add a full replacement bumper to your Tacoma just so you can mount a winch? You are not alone. Full replacement bumpers are 100-150+ lbs, degrade aerodynamics and are expensive. Keep your stock bumper cover, factory looks and your MPG with the installation of this winch mount within and behind the stock bumper cover.

  • Designed and built in Texas!
  • No cutting on your bumper cover!
  • Includes our new Big Mouth Hawse either bare raw aluminum or coated in Silver Teflon infused powder!
  • Simple cutting of black removable chin piece for recovery points and hawse/winch opening. Skid plate acts as simple and very precise template.
  • Removable skid plate included. If you damage your skid plate in the future just remove 6 bolts, remove and replace!
  • Includes power steering cooler relocation brackets.
  • Optional winch solenoid box relocation bracket. (if your winch doesn't allow side mounting)
  • Optional license plate mount for states that require front license plates.
  • CNC Laser cut - clean and precise
  • 1" wide shackle mounts are drilled .890" ID for .880" OD or smaller pins which is common for a 3/4" shackle. Pin sizes can vary. We offer Van Beest shackles which will fit our shackle mounts.
  • Lighter than most aftermarket bumpers at 62 lbs WITH the included Big Mouth hawse!
  • Built to last. Winch tubs are .250" steel with a .135" skid plate.
  • Full height front and rear winch tub.
  • Will accept most winches with industry standard 10" x 4.5" bolt pattern.
  • Light tabs to accomodate most cube style (3") lights such as our Sirius Pro Series LED's.

OPTIONS:

  • Select Bare Steel or black, silver or Super White powder coating for your winch mount and skid plate. Whatever color you choose, everything will be that color.
  • We send this winch mount with our new Big Mouth hawse, By default it is bare (and should be polished if you do not want powder coat) but we can coat it with a special Teflon infused black or silver powder.
  • Winch solenoid/contactor control box remote mount bracket. This will enable you to mount most any box to the side of the winch and within our winch tub. These come in bare steel or powder coated black.
  • License plate mounting bracket for states that require a front license plate. Can option in silver or black powder coat as well.

This mount will only allow synthetic rope winches as you can not fit a roller fairlead. Please read the FAQ at the tab above for more information.

 

We offer powder coating in black and silver in a very durable textured powder coat and can do custom colors for an additional fee. Please keep in mind that even though we go to great lengths to protect the coating we are not responsible for shipping damage to any coatings. Expect a 5-7 business day delay in shipping if you want your bumper coated. Read this article for more information.

 

PLEASE READ THE FAQ AT THE TAB ABOVE AND THE ARTICLES BELOW. INSTALL DOCS ARE LOCATED IN THE DOCUMENTATION TAB ABOVE.

IMPORTANT INFORMATION

Installation Videos
Winch Fitment
Paint/Coatings
Suspension Article
Customer Install Photos

WEIGHT EXAMPLE

Winch mount bumper: 62 lbs
Winch with no rope: 52 lbs
85' x 3/8" AmSteel rope: 3.6 lbs
Coating and fasteners: 1 lb
Total weight: 118 lbs

 
In stock