Mean Mother Exhaust Jack

List price: $179.99
$161.99
You save: $18.00 (10%)
Save 10%
MM-EXJ
In stock
+

Air jacks are the perfect recovery item for any off road traveller exploring areas where soft sand, snow & mud might be encountered. When a vehicle gets bogged in these conditions a normal jack is useless as it will sink into the ground. The Mean Mother air jack can raise a vehicle high enough so you are able to position rocks, wood or other objects to assist in creating traction for the wheels. It works by using the vehicle’s exhaust gases from the tailpipe to inflate the air bag. Alternatively it can be inflated using an onboard or portable air compressor. 

The air jack bag features a toughened double layer reinforced lifting surface which provides stability and control when raising a vehicle. Constructed from heavy duty high tenacity nylon, it’s coated with plasticised PVC to provide maximum strength and resistance against tearing. Special triangular feet built into the base provides superior grip and maximum grounding in all conditions. Exhaust jacks are not an alternative to the vehicle’s factory supplied jack, they are a serious recovery product.

8800 lb maximum gross vehicle mass (GVM)

Kit includes:
1 x 5m exhaust hose
1 x 1m extension hose
1 x air compressor adaptor
1 x pair of leather gloves
1 x puncture repair kit (3 patches + 1 glue)
2 x protective mats
1 x yellow carrying zipper storage bag
1 x instruction manual
Two year warranty
Maximum GVM 8800 lbs

Manufacturer:
Mean Mother
MMSHV
$99.00 $89.00

This uniquely designed 4x4 recovery shovel offers you everything from a small spade to full sized long handle shovel to easily shift sand and dirt at a rapid rate. Its versatility is unmatched with up to five different configurations to suit most recovery situations. With a PE outer skin and reinforced steel core, it’s strong enough to handle the toughest of conditions and comes packed neatly in its own custom storage bag.

  • 5 Configuration options
  • Includes Storage bag
  • PE Outer Skin with reinforced steel core
  • Heat treated Carbon Steel blade
  • Min Length 40in
  • Max Length 65"
In stock

MMDK01
$59.99 $54.00
  • 2” Dial, 0 - 60 psi, braided flexible air hose. 
  • ANSI grade B accuracy. 
  • Quick release deflator and gauge attachments. 
  • Pressure release button on stem. 
  • Shock resistant. 
  • Quality zipper storage pouch. 
In stock

MM-KIT09
$249.00 $224.00

Having a fully stocked and properly maintained recovery kit is an essential accessory for any 4WD enthusiast. It is very important to have quick and easy accessibility to all your recovery equipment. Each Mean Mother recovery kit has been carefully tailored to include the correct equipment for most recovery situations.

The Mean Mother 8 piece kit is best suited to the 4WD enthusiast who has a winch installed on the vehicle or a hand winch on board. Designed to maximise winch capabilities, performance and versatility. The kit offers users the ability to self recover or perform a snatching recovery.

Kit includes:

  • 1x 8000kg Australian made snatch strap
  • 1 x 8000kg Winch ext strap 10m x 50mm
  • 1x 12000kg tree trunk protector (3mm x 75mm)
  • 1 x 8000kg snatch block
  • 2 x 5 tonne bow shackles
  • 1 x Pair of gloves
  • 1 x Heavy duty storage bag
In stock

EW12000S
$949.00 $854.00

Mean Mother built the EDGE series recovery winch to appeal to the 4WD enthusiast who is passionate about quality but wants value for money. The EDGE series ticks all those boxes with standard features not found on comparable winches.

Each winch in the EDGE series features a three stage planetary gearbox with sintered steel bushings which have been pressed and stamped (no pop rivets) into the gear carrier. A sliding ring gear clutch provides maximum strength and efficiency in forward and reverse winching operations with ease of free spool functionality. Each gear box is assembled and lubricated using synthetic grease and conforms to our strict assembly guidelines. Providing strength and enduring the pulling forces exerted is a hardened seamless steel drum assembly. Delivering maximum safety during a recovery is an automatic load holding in-drum brake system.

Delivering power to the winch is a waterproof solenoid that uses Ag-Cd alloy contacts (Silver cadmium alloy). The technology and quality of these contactors resist arching when switching currents. This prevents the contactors from fusing together creating a closed circuit which can potentially damage your winch or vehicle and possibly serious injury to the operator. 

This solenoid is housed in a sleek and stylish control box which has a waterproof plug. The heavy duty hand control comes with a 5 metre power cord with the option to upgrade to a wireless remote control which offers the user complete control and flexibility to stand well clear of the winch during operation. 

The 9500lb & 12000llb series winches use an efficient 12 volt 4.8hp series wound motor. These models offer performance and reliability in the toughest of conditions. We are so confident in the quality and design of our EDGE series winches we offer a limited 5 year mechanical component warranty and a 1 year electrical component warranty. 

 

EDGE SERIES FEATURES

Three Stage Planetary with quality components

 -Sintered Steel Bushings
 -Hardened Steel Gears

Waterproof contactor (solenoid) system. Compact design, can be permanently mounted on the bull bar or in the engine bay.

Waterproof quality plug with protective cap.

All EDGE series winches have been equipped with Tinned Coated Copper Power Cables with PVC insulation and the additional protection of a fibreglass outer sheath.

Each synthetic rope is fitted with a stainless steel thimble with crush tubing for maximum eyelet strength.

Dyneema® is a safer and lighter option than wire cable, and is regarded as the ultimate in performance.

QUALITY ENGINEERING

  • Sintered steel bushings
  • Hardened steel gears
  • Stamped planetary gear carriers
  • Ag-Cd contacts (silver cadmium alloy)
  • Hardened steel brake

WHAT'S IN THE BOX

  • Winch
  • Control Box
  • Hand Control
  • Tinned Copper Power Cable kit with Fibreglass Sheath Protection
  • 3/8" x 100', (Genuine Dyneema® SK75)
  • Hawse Fairlead
  • 10-8 Clevis Hook
  • Hand Saver Hook Strap
  • Detailed Instruction Manual
  • Warranty registration Card
  • Winch and Fairlead Mounting Hardware (Bolts, Washer and Nuts)
  • Side mounting Kit for control box
  • Tie bar mounting kit for control box
  • Spare Gearbox gasket

PERFORMANCE TESTED & GUARANTEED

To ensure the very best manufacturing processes are undertaken in the building of our EDGE series winches we have developed our own detailed testing procedures to ensure they meet and exceed our engineering, performance and quality benchmarks. Our testing procedures are divided into two individual areas:

Each model is tested to the following specifications and recorded:

  • 1.1 times rated line pull (dynamic testing) and
  • 1.25 times rated line pull (static testing)

DURABILITY TESTING

The winch is tested to the maximum duty cycle (1 minute) and rated line pull (winch applicable rating) in a dynamic test. This test is performed no less than 100 times and recorded; furthermore the first (1st) cycle is tested to 1.25 times the rated line pull. After the winch has passed 100 cycles without failure the winch and components are passed and inspected. 

NOTE: All testing was performed with the 1st layer of winch cable on the drum.

These tests are designed to examine the overall strength and ability of the winch while observing and recording the important characteristics and operational performance specifications.

Please refer to our warranty statement for further details.

   
   
In stock

EW9500S
$879.00 $791.00

Mean Mother built the EDGE series recovery winch to appeal to the 4WD enthusiast who is passionate about quality but wants value for money. The EDGE series ticks all those boxes with standard features not found on comparable winches.

Each winch in the EDGE series features a three stage planetary gearbox with sintered steel bushings which have been pressed and stamped (no pop rivets) into the gear carrier. A sliding ring gear clutch provides maximum strength and efficiency in forward and reverse winching operations with ease of free spool functionality. Each gear box is assembled and lubricated using synthetic grease and conforms to our strict assembly guidelines. Providing strength and enduring the pulling forces exerted is a hardened seamless steel drum assembly. Delivering maximum safety during a recovery is an automatic load holding in-drum brake system.

Delivering power to the winch is a waterproof solenoid that uses Ag-Cd alloy contacts (Silver cadmium alloy). The technology and quality of these contactors resist arching when switching currents. This prevents the contactors from fusing together creating a closed circuit which can potentially damage your winch or vehicle and possibly serious injury to the operator. 

This solenoid is housed in a sleek and stylish control box which has a waterproof plug. The heavy duty hand control comes with a 5 metre power cord with the option to upgrade to a wireless remote control which offers the user complete control and flexibility to stand well clear of the winch during operation. 

The 9500lb & 12000llb series winches use an efficient 12 volt 4.8hp series wound motor. These models offer performance and reliability in the toughest of conditions. We are so confident in the quality and design of our EDGE series winches we offer a limited 5 year mechanical component warranty and a 1 year electrical component warranty. 

 

EDGE SERIES FEATURES

Three Stage Planetary with quality components

 -Sintered Steel Bushings
 -Hardened Steel Gears

Waterproof contactor (solenoid) system. Compact design, can be permanently mounted on the bull bar or in the engine bay.

Waterproof quality plug with protective cap.

All EDGE series winches have been equipped with Tinned Coated Copper Power Cables with PVC insulation and the additional protection of a fibreglass outer sheath.

Each synthetic rope is fitted with a stainless steel thimble with crush tubing for maximum eyelet strength.

Dyneema® is a safer and lighter option than wire cable, and is regarded as the ultimate in performance.

QUALITY ENGINEERING

  • Sintered steel bushings
  • Hardened steel gears
  • Stamped planetary gear carriers
  • Ag-Cd contacts (silver cadmium alloy)
  • Hardened steel brake

WHAT'S IN THE BOX

  • Winch
  • Control Box
  • Hand Control
  • Tinned Copper Power Cable kit with Fibreglass Sheath Protection
  • 9.53mm x 30.5m, (Genuine Dyneema® SK75)
  • Hawse Fairlead
  • 10-8 Clevis Hook
  • Hand Saver Hook Strap
  • Detailed Instruction Manual
  • Warranty registration Card
  • Winch and Fairlead Mounting Hardware (Bolts, Washer and Nuts)
  • Side mounting Kit for control box
  • Tie bar mounting kit for control box
  • Spare Gearbox gasket

PERFORMANCE TESTED & GUARANTEED

To ensure the very best manufacturing processes are undertaken in the building of our EDGE series winches we have developed our own detailed testing procedures to ensure they meet and exceed our engineering, performance and quality benchmarks. Our testing procedures are divided into two individual areas:

Each model is tested to the following specifications and recorded:

  • 1.1 times rated line pull (dynamic testing) and
  • 1.25 times rated line pull (static testing)

DURABILITY TESTING

The winch is tested to the maximum duty cycle (1 minute) and rated line pull (winch applicable rating) in a dynamic test. This test is performed no less than 100 times and recorded; furthermore the first (1st) cycle is tested to 1.25 times the rated line pull. After the winch has passed 100 cycles without failure the winch and components are passed and inspected. 

NOTE: All testing was performed with the 1st layer of winch cable on the drum.

These tests are designed to examine the overall strength and ability of the winch while observing and recording the important characteristics and operational performance specifications.

Please refer to our warranty statement for further details.

   
   
In stock