Save 15%
3/4" VAN BEEST SCREW PIN SHACKLE 62,000 LBS

3/4" VAN BEEST SCREW PIN SHACKLE 62,000 LBS

Van Beest
Write a review
List price: $26.00
$22.00
You save: $4.00 (15%)
G-4161-34
In stock
+ −
Add to wish list Add to comparison list

This shackle works with our FJ and Tacoma winch mount bumpers. Make sure to order a quantity of 2 if you need a pair.

Options now available for powder coating in Teflon infused black or silver that matches our bumper coatings and a regular powder coat in red. Select your option above.

3/4" VAN BEEST SCREW PIN SHACKLE 62,000 LBS

Specifications
Weight 2.20 lbs (1.0 kg)
Breaking Strength 62,000 lbs (28,120 kg)
Bow Diameter 3/4" (19 mm)
Pin Diameter 7/8" (22 mm)

Highlights
Shackle type: green screw pin anchor bow shackle
Material: high tensile steel, Grade 6, quenched & tempered
Safety Factor: MBS equals 6 x WLL
Working load limit (WLL) permanently marked on every shackle
Meets performance requirements US Fed. Spec. RR-C-271 Type IVA Class 2, Gr. A
Finish: hot dipped galvanized
Temperature range: -20°C up to +200°C
Original Green Pin© by Van Beest - Netherlands

Van Beest manufactures high quality, high tensile shackles in its production facility in Sliedrecht, the Netherlands. It is a genuine, made in Holland product. They brand these products as Green Pin®. Van Beest Green Pin® shackles can be identified by the green colored pin and the marking on the shackle body and pin. Green Pin® and the color green applied to the pin are both registered trade marks of Van Beest.

No specifications listed.

Manufacturer:
Van Beest
Save 17%
KU7056
Daystar D-Ring - Shackle Isolators
$17.95 $14.95
  • Select your color above.
    • Orange
    • Green
    • Blue
    • Red
    • Black
    • Pink
    • Glow in the Dark
    • Zombie/Camo
  • Prevents rattles
  • Prevents damage to the surface of anchor points/bumpers
  • Fits standard 3/4” d-rings or shackles
  • Limited lifetime warranty
  • Sold as a pair

The Daystar D-Ring Isolators install on any standard 3/4" shackle and are constructed of a durable Polyurethane material. They simply snap into place and can be installed or removed in moments. Polyurethane acts as an isolator for the shackle and prevents the shackle from tapping against a bumper or any other recovery point when the vehicle is in motion. The Isolator also protects your bumper’s finish from scratches caused by D-Ring contact. Daystar D-Ring Isolators are available in Black or Red and can help add some color to any off-road vehicle.

The D-Ring Isolators are sold in pairs.

In stock
Save 21% Black
DAYKU70057
Daystar D-Ring-Shackle Isolator Kit
$22.65 $17.95

Perfect for use with our Van Beest 3/4" shackles!

  • D-Ring/Shackle Isolator
  • Black or Red
  • Includes 4 Washers and 2 Isolators, enough for 2 shackles.


The Daystar D-Ring Isolators install on any standard ¾" shackle and are constructed of a durable Polyurethane material. They simply snap into place and can be installed or removed in moments. Polyurethane acts as an isolator for the shackle and prevents the shackle from tapping against a bumper or any other recovery point when the vehicle is in motion. The Isolator also protects your bumper’s finish from scratches caused by D-Ring contact. This kit includes D Ring Isolators with 4 Polyurethane Washers to eliminate D-ring rattle and noise.

In stock

No posts found

Write a review