Mean Mother Peak Series ATV/UTV 3500lb Winch

List price: $349.00
$314.00
You save: $35.00 (10%)
Save 10%
EW3500S
In stock
+

 

PEAK SERIES ATV/UTV WINCHES

Our 2000 and PEAK Series ATV recovery winches are available in 2000lb, 2500lb and 3500lb rated capacities. Each winch comes with steel cable as standard and the 3500lb has the option of factory fitted genuine Dyneema® SK75 fibre synthetic rope.

Mean Mother ATV winches have been designed to be compact and light weight and are ideal for most ATV/UTV vehicles. The 2500lb and 3500lb models are supplied with a universal mounting plate for easy installation. Each model has more than enough power to recover ATV/UTV vehicles from most situations. When selecting a winch you should always select one that is 1.5 times the Gross Vehicle Mass (GVM).

PEAK MECHANICAL

The 2000lb model features a single stage planetary gearbox while the 2500lb and 3500lb models use a two stage planetary gearbox. All the winches in the range have a clutch system allowing the user to disengage the gearbox and free spool the cable.

PEAK ELECTRICAL

All of the ATV winches use efficient permanent magnet motors. The 2500lb and 3500lb models have a waterproof solenoid and handle bar switch to control forward and reversion functions, while the 2000lb model uses a hand control which is connected directly to the winch. The low amp draw, forward and reverse control and ease of installation makes these winches the perfect choice for ATV/UTV recovery, as well as boat & personal water craft trailers.

 

PEAK SERIES FEATURES

Two Stage Planetary with quality components

-Sintered Steel Bushings
-Hardened Steel Gears

Waterproof contactor (solenoid) system. Permanently mounts to ATV.

Waterproof quality plug with protective cap.

Mountable handle bar forward and reverse toggle switch.

Each synthetic rope is fitted with a stainless steel thimble with crush tubing for maximum eyelet strength.

Dyneema® is a safer and lighter option than wire cable, and is regarded as the ultimate in performance.

QUALITY ENGINEERING

  • Free spool function
  • Steel bushings
  • Steel gears
  • Forward and reverse operation

WHAT'S IN THE BOX

  • Winch
  • Winch mounting plate
  • Solenoid (contactor)
  • Handle bar switch with mounting bracket
  • Power cable kit
  • 4.76mm x 15m, Genuine Dyneema® SK75
  • Hawse Fairlead
  • 6/6" Clevis Hook
  • Hand Saver Hook Strap
  • Detailed Instruction Manual
  • Warranty registration Card
  • Winch and Hawse Mounting Hardware (Bolts, washer and Nuts)

 

 

Please refer to our warranty statement for further details.

GENERAL SPECIFICATIONS

Rating: 3500lb - Peak Series

Voltage: 12 Volt
Gear Ratio: 242:1
Gear Tran: 2 Stage Planetary
Clutch: Turn 90 degree by handle
Motor Type: Permanent magnet
Motor: 3.5 Hp
Control: Handle bar mounted, 7' lead
Braking: Self stocking brake
Drum Size: 2.5" x 3.15"
Rope Size: 3/16" x 50' Genuine Dyneema SK75
Clevis Hook: 6"
Overall Dimensions: 13.5" x 4.57" x 4.5"
Weight: 23 lbs
Mounting Bolt Pattern: 4.88" x 3"
Battery Power Cables: 2 x 90"x 8ga, Tinned Copper with Sheath Protection
Motor Power Cables: 1 x 24" & 1 x 18" 8ga, Tinned Copper with Sheath Protection
Recommended Battery: Minimum 650CCA
Finish: Powder Coated

 

PERFORMANCE 1ST LAYER

Line Pull Line Speed Motor Amps Draw Current
0 lbs 18.4 Fpm 30 12 Volt
1000 lbs 15.0 Fpm 86 12 Volt
6000 lbs 13.1 Fpm 136 12 Volt
8000 lbs  9.8 Fpm 230 12 Volt
       

    
               
          
          
           
           

 

 

LINE PULL & CABLE CAPACITY BY LAYER

Cable Layer Rated Line Pull Cable Length
1 3500 lbs 9.2 Feet
2 2900 lbs 20.3 Feet
3 2500 lbs 33.1 Feet
4 2200 lbs 47.6 Feet
5 1900 lbs 50 Feet

 

 

Manufacturer:
Mean Mother

No posts found

Write a review