Viper Midnight 8500 lb Recovery Winch

$249.00
MD8500
Out of stock

OUT OF STOCK UNTIL FURTHER NOTICE - NO VIPER WINCHES AVAILABLE

The VIPER Midnight 8,500lb Recovery Winch is perfect when needing a durable winch for Jeeps, Tow Trucks and all 4x4 Recovery vehicles. Constructed with permanent magnet motors and steel gears, the Midnight 8,500 winch delivers a reliable performance that users recognize and trust. Fully sealed with a metal, 3-stage planetary gear train, it is heavy duty and includes all the features and extras that users recognize and trust. Backed by a Limited Lifetime Warranty and toll free customer service line, this metal bodied winch has a standard mounting bolt pattern of 10” x 4.5”.

Choose steel cable or synthetic rope.


KIT COMPONENTS
  • 94’ x 5/16” Steel Cable
  • BLACK, Steel Hawse Fairlead
  • Wireless Remote Switch
  • 15’ Cabled / Tethered Hand Held Remote Switch
  • Integrated Contactor/Solenoid (weather sealed)
  • Circuit Breaker (weather sealed)
  • Clevis Hook & Handsaver Strap
  • 6ft of 2-gauge (English) / 196.4 (Metric) Wiring
  • Mounting Bolt Pattern – 10.0" x 4.5" (254mm x 114.3mm)
  • Limited Lifetime Warranty

 

SPECS

  • Motor – 12V DC, Sealed 4.5HP permanent magnet
  • Rated Line Pull – 8,500lbs (3855.5kgs)
  • Line Speed – 0lbs – 84 Amps motor draw / 18 FPM (5.5 MPM)
  • Line Speed – 8,500lbs – 320 Amps motor draw / 3.5 FMP (1.1 MPM)
  • Gearing / Gear Ratio – 3-Stage planetary / 235:1
  • Brake – Mechanical, Automatic load holding
  • Clutch – Free-Spooling, Lever Activated
  • Dimensions – 21.3” (L) x 6.3” (D) x 8.6” (H) (541mm x 160mm x 218mm)
  • Weight - 73 lbs Steel / 57 lbs Synthetic
  • Mounting Bolt Pattern – 10.0” x 4.5” (254mm x 144.3mm)
  • SKU (UPC) : MD8500_ST (00810541023679) / MD8500_BK (00810541023686)

INTEGRATED SOLENOID/CONTACTOR
  • Easy installation - no need to find a place to mount the contactor/solenoid
  • All-in-one setup, easy to install on a receiver mount for multiple uses

SYNTHETIC CABLE UPGRADE AVAILABLE FOR ADDITIONAL CHARGE
  • 3/8" diameter - average strength is 19,600 lbs
  • Reduced recoil - VERY SAFE!
  • Easy to use

SPECS

  • Motor – 12V DC, Sealed 4.5HP permanent magnet
  • Rated Line Pull – 8,500lbs (3855.5kgs)
  • Line Speed – 0lbs – 84 Amps motor draw / 18 FPM (5.5 MPM)
  • Line Speed – 8,500lbs – 320 Amps motor draw / 3.5 FMP (1.1 MPM)
  • Gearing / Gear Ratio – 3-Stage planetary / 235:1
  • Brake – Mechanical, Automatic load holding
  • Clutch – Free-Spooling, Lever Activated
  • Dimensions – 21.3” (L) x 6.3” (D) x 8.6” (H) (541mm x 160mm x 218mm)
  • Weight - 73 lbs Steel / 57 lbs Synthetic
  • Mounting Bolt Pattern – 10.0” x 4.5” (254mm x 144.3mm)
  • SKU (UPC) : MD8500_ST (00810541023679) / MD8500_BK (00810541023686)


97890
$18.50 $16.85

Use this plate to relocate your Warn VR series recovery winch contol (solenoid) pack from the top of the winch to wherever you need to mount it.

  • For all Gen II VR Series Winches
In stock

$30.00

Waterproof 9' Cabled / Tethered Remote Switch.

Plug In Connector - designed to work with VIPER Classic and Max Series Recovery winches.

In stock

882843
$34.95

Remote plug extension allows you to locate your control cable plug anywhere within 16" of the contactor box. 

Great for use with our Toyota FJ and Tacoma winch bumpers as the ComeUp ports generally pont straight up which makes it impossible to attach your control cable without this extension as the bumper cover will block access.

This will not work with Engo or Viper winches as they are 3 pin and ComeUp is a 6 pin connector.

In stock