Save 14%

Warn Zeon 10-S 10,000 LB Recovery Winch

List price: $1,578.00
$1,358.00
You save: $220.00 (14%)
89611
In stock
+

Ships FREE via Ground to the lower 48 states!

Choose your way to conquer the terrain. The ZEON 10-S is tough enough to tackle anything you will, with a look that is advanced, capable and strong. Muck-busting sealing keeps out everything but the good times. Add a hyper-durable cast-aluminum housing, satin-black finish, and 10,000 Pound single-line pulling capacity and, well, you've got a workhorse unit you can trust for years to come.

  • 10,000 Pound (4536 Kilogram) Single-Line Pulling Capacity
  • Includes 100 Foot Of 3/8 Inch Warn Spydura Synthetic Rope, Which Includes A Temperature-Resistant Sleeve On The First Layer, A Ballistic Nylon Sliding Sleeve And A Polished Aluminum Hawse Fairlead
  • Convertible Control Pack Can Be Attached To The Winch Or Remotely Mounted, Allowing For Various Winch Mounting Options And Looks
  • New-Design Planetary Gear Train And Series-Wound Motor Deliver Fast, Quiet, And Reliable Pulling Power
  • Satin-Black Powder-Coated Finish With Stainless Steel Fasteners And Clutch Lever Looks Great And Inhibits Corrosion. Improved Winch Sealing To Keep The Elements Out
  • Large Diameter Winch Drum Reduces Rope Wear, Is Light Weight, And Has An Integrated Rope Anchor For Easy Rope Installation
  • Limited Lifetime Warranty

*Control Pack Relocation Kit. Required to mount control box remotely from winch. PN 89970 (Short kit), PN 89960 (Long kit)

Zeon Operator's Manual (83449A0_rs.pdf, 5,744 Kb) [Download]

TYPE Electric
MOUNT TYPE Vehicle Mounted
RECOMMENDED USE Vehicle Recovery
VOLTAGE 12 Volt
ELECTRICAL CONTROL TYPE Contactors
MOTOR TYPE Series Wound
THERMAL SHUTOFF No
DRIVE GEAR TYPE Planetary
GEAR REDUCTION RATIO 216:1
FREE SPOOLING Yes
BRAKE TYPE Mechanical Cone
LINE DIAMETER (IN) 3/8 Inch
LINE LENGTH (FT) 100 Feet
LINE MATERIAL Synthetic
FAIRLEAD TYPE Hawse
CONFORMS TO J706 STANDARDS No
REMOTE TYPE Handheld Remote Switch
MOUNTING HOLE QUANTITY 4
OPERATION TYPE Automatic
MOUNTING PATTERN LENGTH (IN) 10 Inch
MOUNTING PATTERN WIDTH (IN) 4-1/2 Inch
INCLUDES MOUNTING HARDWARE No
COLOR Black
MAX AMP DRAW/ LINE PULL 409 Amp Draw/ 10000 Pound
MAX LINE PULL/ LINE SPEED 10000 Pound/ 4.8 Feet Per Minute
Manufacturer:
Warn
97890
$18.50 $16.85

Use this plate to relocate your Warn VR series recovery winch contol (solenoid) pack from the top of the winch to wherever you need to mount it.

  • For all Gen II VR Series Winches
In stock

98348
$117.29 $91.19

Remote extension for use with Warn 3, 5 or 6 pin remotes. Use this extension to make connecting your control cable easier.

2' in length.

In stock

100154
$113.43 $94.53

This product provides a solution to easily connect your WARN winch remote to your winch in a different location and with minimal aesthetic changes to the external socket mounting location. 

This is marketed towards he Zeon line of winches but is backwards compatible with all other current Warn vehicle winch models. This is much longer at 5' than the 98348 (24") but has a connector that enables you to fit the cable through a much smaller hole.

  • Waterproof Connector
  • Allows For Full Remote Functionality
  • Aesthetically Pleasing Once Attached To The Exterior Of The Vehicle
  • Ideal For Hidden WARN ZEON Winch Installations
  • Easy Installation: Can Fit Through A 24 Millimeter (slightly smaller than 1")  Hole Drilled On The Vehicle (Typically The Front Grille Area)
  • Limited 1 Year Warranty
  • 5' in length
In stock

No posts found

Write a review