Shackle Mount - 1"

Free shipping
In stock

For the DIY crowd we are offering our 1" wide shackle mount. This is the same mount found on our FJ bumpers and will be incorporated in to all future bumpers.

Dimensions are noted in drawing above. These are cut from 1" A36 HRS using a water jet and the holes are machined to .880". Most 3/4" shackles use a .870" pin but vary by manufacturer. Check yours before ordering or purchase 3/4" Van Beest shackles from us.

Order the quantity you need. Ships FREE via USPS Priority Express.


License plate mounting bracket for states that require a front license plate.

This is made to work with our 2016-2020 Tacoma winch mount.

Options above for bare steel, black or silver powdercoat.

Comes with:

  • Base plate that mounts behind a hawse.
  • License plate mount that bolts to base plate and is adjustable up and down.
  • Hardware to fasten plate mount to base plate.
In stock

$32.99 $24.99

These work great on roller fairleads used with our winch mounts, makes for a very incognito install as well.

If you're state requires a front license plate, we have a solution for you. Instead of drilling holes in your bumper or risking not running a front plate, this easy to install license plate holder attaches to your winch roller fairlead. Simply bolt your license plate to the bracket and snap the holder in place. Your license plate is now securely mounted yet easily removable for winching.

In stock


Price now includes shipping via USPS Priority 2 Day Express to the lower 48 states.

These are supplied with each of our Tacoma bumpers but are now offering these for use with just about any bumper on a 2005-2014 Toyota Tacoma.

Order 1 to receive a pair of plates.

These provide two functions:

  • Reinforcement of the factory plates where your bumper bolts to the frame.
  • Exact hole sizing for better clamping force over your aftermarket bumper that probably have elongated holes for adjustability.

Just remove the factory washer nuts off the end of your studs, slide these on and reinstall your nuts and torque. Just that easy. These measure 2"x3" and are .250" thick bare steel.

In stock

No posts found

Write a review