Michael from Washington sends us photos of his FJ TTUE with our black powder coated FJ Cruiser Winch Mount and a Smittybilt X2O 10k winch. Very nice!
Buy yours here: https://www.usoffroad.us/store/bumpers/winch-mounts/fj-cruiser/
Tired of seeing about 60% field of view (FOV) out of your FJ’s backup camera? Don’t like your stock tire cover but don’t want to see the ugly camera housing exposed when you remove it?
We were too so we came up with Camera Armor. Not only does Camera Armor look better and provide a 100% FOV out of your backup camera but it also has a hidden bracket mounting system so you can mount a GoPro, antenna or light in the protective area of your spare!
As with our winch mount bumpers, we provide this to you in bare .125″ thick steel. You can paint, powder coat or whatever makes you happy. The aluminum end cap is anodized clear to protect the aluminum from the weather and keep it looking good. Hardware mounts flush and is stainless steel.
Installation is simple, pull off your spare wheel/tire, slide the camera armor over the studs and reinstall your wheel. Done. You can then leave it with the filler bracket or swap out brackets without removing the wheel again.
When you purchase Camera Armor you will receive:
Camera Armor body
Aluminum end cap/bracket mount
Filler bracket (does not protrude from under the cap but fills the slots so it doesn’t collect dirt/water)
Extended bracket with no accessory holes drilled. (you can bend, drill and cut to your heart’s desire)
2 x stainless steel flat allen head screws (1/4″ x 20)
Paint or coat as you wish, you can also paint the aluminum cap, make it yours.
Buy yours here: https://www.usoffroad.us/store/armor/fj-camera-armor/
U.S. Off Road will be returning for our 4th Lone Star Toyota Jamboree April 30th-May 3rd. We will be hosting our 2nd Stocker Poker Run where the winner receives a choice of FJ or Tacoma Winch Mount Bumper!
This is scheduled for Friday, May 1st at 1PM. We are going to limit this to 15 FJ’s or 2005-2015 Tacos. Looking forward to another fun Poker Run this year!
FJ Bumper: http://usoffroad.us/store/mount
Tacoma Bumper: http://usoffroad.us/store/tacoma-bumper-2012
U.S. Off Road is excited to be a Vendor at IH8Mud.com. IH8Mud is one of the premier Land Cruiser related sites on the Internet is a great source of information for FJ’s of all types and years and we are elated to be a part of this group of great FJ owners and enthusiasts.
Expect to see some special offers on our FJ and Tacoma Winch Mount Bumpers, Engo and Viper winches, lights and recovery gear posted on our Vendor Forum there so make sure you go visit and by all means, sign up!
After two very successful years of sales around the world I am proud to announce the latest evolution of our FJ Winch Mount Bumper. While we have had zero known issues and nothing but praise for this product I am always looking to make improvements where we can. To that extent I was looking to cut down on welds and deburring time, maintain or improve strength and accuracy and maybe even shed a few pounds.
Here’s an example of how much this setup will weigh:
Winch mount bumper: 52.50 lbs
Viper Elite winch with no rope: 51.40 lbs
85′ x 3/8″ AmSteel rope: 3.6 lbs
Aluminum hawse: 1.5 lbs
Coating and fasteners: 1 lb
Total weight: 110 lbs
With the recent addition of more drain holes and light tabs designed to work with 2″ LED lights I feel this bumper has evolved in to a very nice solution.
I have also been working with UPS to negotiate reduced shipping costs and take advantage of the lighter weight. Every penny counts.
I appreciate everyone’s business over the past two years and look forward to many more years of providing these types of products to the FJ owners.
We have some new products in the works for FJ owners so be sure to visit us at www.usoffroad.us for updates.
Here’s a few photos of the new version.
